Shower room installation precautions
Shower room installation precautions 1: When transporting, the shower room is easily transported horizontally to break the glass. It must be carried vertically and by two or more people at the same time, and care should be taken to avoid collision with hard objects.
Note for shower room installation: After the shower room package is unpacked, place the glass vertically against the wall and place it horizontally. Placing the glass horizontally or unevenly may cause glass damage, resulting in property damage or personal injury.
Shower room installation precautions three: Do not use acids, alkalis, organic solvents and acid detergents when cleaning, otherwise it will damage the surface of the product; use water or neutral detergent to clean the surface of the product Stains can be removed with a clean cloth soaked in alcohol;
Note 4 for installation of shower room: Acrylic board is easy to adhere to dust due to static electricity. When cleaning the acrylic bottom basin, just use a cotton cloth dipped in soapy water to easily remove the dust and achieve the cleaning effect.
Note 5 for shower room installation: When using sealed silicone, do not apply silicone to the surface of acrylic sanitary ware. If you accidentally apply a little, remember not to rush to wipe it, which is more difficult to remove. It should be gently peeled off after curing. Do not scratch it with hard objects, otherwise it will cause surface damage. After the basin is installed, it should be used after the silicone is completely cured (the curing time of the silicone is 24 hours).